On this page
Your needs, this model
Does it fit your priorities?
Do you want a 10x42 with a broad published scene for walking and scanning?
The exact Leupold part 187990 page lists 10x42, a 342 ft / 6.5° field at 1,000 yd and a 22.6 oz instrument weight. That is a wider listed scene and lower carry weight than its 12x50 sibling; it is a spec comparison, not a measured result.
Explore this need in the finder →Can the 22.6 oz instrument weight and 16 mm published eye relief satisfy your carry and viewing screen?
The exact 187990 page lists 22.6 oz and 16 mm eye relief. It fits a 23 oz listed-instrument ceiling and a 16 mm published eye-relief minimum, but eyeglass fit still requires a real try-on.
Explore this need in the finder →Do you need a published close-focus distance within seven feet?
The exact 187990 page lists a 6.2 ft closest focus, so it falls within a seven-foot screening limit. The closer focus does not predict viewing comfort at every distance or for every observer.
Explore this need in the finder →The Leupold BX-3 Alpine HD 10x42 (part 187990) is the lower-mass member of this two-model family. Its 10x magnification, 42 mm objectives and manufacturer-listed 342-foot field at 1,000 yards make it a better starting point for scanning and following moving wildlife than its 12x50 sibling, while the magnesium chassis and weather claims suit outdoor carry. At 22.6 ounces it is still a full-size instrument, not a pocket binocular.
Why start with the 10x42?
Leupold lists a 6.5-degree real field, 16 mm eye relief, 4.1 mm exit pupil and 6.2-foot close-focus distance. The 342-foot field gives a concrete basis for comparing scene width; it is not a lab measurement by us. In practical terms, a broader view makes it easier to reacquire a bird or animal after it moves through branches and to sweep across terrain without losing as much of the surrounding scene. Fixed 10x power gives more target scale than an 8x pair, but it also magnifies hand motion. If you expect long, still observation, consider the tripod port and the actual adapter you intend to use.
The 12x50 version uses more magnification and a 50 mm objective, but Leupold lists a 278-foot field, 5.3-degree view and 29.2-ounce weight for it. Compared with that sibling, this 10x42 is 6.6 ounces lighter and gives a wider published scene. The 12x50 may be the more appealing choice when you mostly sit or glass from a fixed position and want the higher power; it is not automatically a better 10x42 replacement. A larger front lens does not by itself prove that the view will look brighter to every observer. These two specifications produce almost the same listed exit pupil: 4.1 mm here and 4.2 mm on the 12x50.
Carry, fit and focusing
At 22.6 ounces for the binocular alone, this is a sensible middle ground for a day pack or chest harness if you value a 42 mm objective. It is heavier than compact 25 or 30 mm binoculars, and the package weight will be greater once straps, covers and a case are included. Leupold gives a 5.7-inch length and an interpupillary adjustment range of 56–74 mm. Those are useful screening numbers, not a promise that the hinge will fit every face. If several people will share the binocular, each should be able to adjust the barrels until the circles merge cleanly.
The published eye-relief figure is 16 mm. Leupold describes low Form-Fit eyecups for use with glasses and also offers medium and winged shapes, but the product page does not give a detailed box-contents list confirming which interchangeable pieces arrive with every retail unit. Try the model with your own frames before treating the specification as a glasses guarantee. The exact page describes a large central focus dial. Its linked owner’s manual explains interpupillary adjustment, focus and diopter setup, plus safe lens cleaning; it is a shared Leupold manual rather than a model-specific performance test.
Weather protection and support
Leupold states that the BX-3 Alpine HD is waterproof and fogproof and describes a redesigned magnesium chassis under rubber armor. Guard-Ion is described as a hydrophobic coating that sheds dirt and water. These are useful outdoor-design claims, but the exact page does not give a numerical immersion depth, duration or IP rating. Do not turn a weather-sealing claim into permission to submerge, pressure-wash or leave optics unprotected in salt water.
The product page calls this model tripod-ready and specifies a built-in 1/4-20 rotatable tripod adapter port. That confirms an adapter-based support option; it does not confirm that a separate adapter or a tripod is in the standard package. If tripod use is essential, identify the adapter and mounting hardware before purchase rather than treating the port as a complete kit. A stable support can be more useful for patient 10x viewing than moving up to 12x and carrying nearly seven additional ounces.
Who should shortlist it?
Choose the 187990 configuration when you want a current 10x42 binocular with a broad listed field, moderate carry weight for its objective class, weather protection claims and a tripod port. It makes the most sense for wildlife observation, open-country scanning and general outdoor use when hand-held power remains important. Compare it directly with the BX-3 Alpine HD 12x50 review if you can accept a narrower field and heavier carry in exchange for 12x magnification. If glasses comfort, minimum IPD, adapter inclusion or low-light viewing is an essential requirement, verify the exact physical fit or package detail rather than inferring it from a catalog label. We did not test a sample or independently measure optical performance.
For routine ownership, set IPD and focus before judging sharpness, use the manual’s lens-care guidance, and keep dust from being ground into coated glass. Leupold publishes a lifetime guarantee, but read the current terms and service instructions for your exact purchase. The US page’s stock or “Where to Buy” state is not a promise that a retailer has inventory. Search the retail phrase “Leupold BX-3 Alpine HD 10x42 binocular 187990”; no exact retail ASIN was verified.
Manufacturer sources: exact BX-3 Alpine HD 10x42 page, its linked Binocular Owner’s Manual, and the BX-3 family introduction. Published specifications and manufacturer descriptions are not independent test results.
Key specifications
Key details at a glance
| Magnification | 10× |
|---|---|
| Objective diameter | 42 mm |
| Real field of view | 6.5° |
| Eye relief | 16 mm |
| Exit pupil | 4.1 mm |
| Close focus distance | 6.2 ft |
More specifications and setup details
| Manufacturer-published weight | 22.6 oz |
|---|---|
| Lens and prism coatings | The exact page names Leupold’s Elite Optical System, High-Definition lenses and Guard-Ion hydrophobic coating. It does not identify ED glass or confirm roof-prism phase/dielectric coatings for this exact model. |
| Water and fog protection | Leupold publishes waterproof and fogproof claims; no numeric depth, duration or IP rating was found on the exact page. Do not infer underwater use. |
| Tripod use | Exact page confirms a built-in 1/4-20 rotatable tripod adapter port and tripod-ready use. It does not confirm a separate adapter or tripod in the standard package; identify the compatible adapter and kit contents before making support essential. |
| Published weight note | Exact manufacturer page-listed instrument weight; carry system, strap, eyecups/covers, case and any mounting adapter add weight. No independent weighing was performed. |
| Manufacturer-rated waterproof | Yes |
| Built-in image stabilization confirmed | No |
| Integrated laser rangefinder | No |
| Onboard ballistic solution display | No |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
- Leupold exact U.S. BX-3 Alpine HD 10x42 product page, part 187990
- Leupold Binocular Owner’s Manual, linked from the exact BX-3 product page; shared two-page manual, not SKU-specific
- Leupold BX-3 Alpine HD launch article (May 13, 2026)
- Leupold official U.S. binocular directory page 1; exact BX-3 row at page 1 position 5
- Leupold official U.S. binocular directory page 2; pagination snapshot
- Leupold official U.S. binocular directory page 3; captured pagination response has no distinct product links
- Official product image linked from the exact Leupold part 187990 page
- Dated exact-model-name SaferProducts.gov/CPSC query; empty response is not universal recall clearance
Choose your optical trade-off first.
Choose viewing purpose first, then magnification, objective size, scene width and any fit, weather or mounting constraint. A direct-Sun requirement is separate: only exact manufacturer-confirmed solar binoculars can pass it.
