On this page
Your needs, this model
Does it fit your priorities?
Do you want the exact R7 10x50 magnification and objective combination?
The exact US page identifies Bushnell R7 10x50, product ID BU-R7-1050, with fixed 10x power and 50 mm objectives. This is a source-checked configuration identity, not an optical-performance test.
Explore this need in the finder →Will the listed 32.7 oz instrument weight and its published view fit your carry plan?
The exact page lists 32.7 oz, 340 ft at 1,000 yd, and a 5 mm exit pupil. The 10x50 and 12x50 are the R7 50 mm models under a 33 oz ceiling; the 10x50 keeps 10x power and the wider listed field.
Explore this need in the finder →Do you need a confirmed direct tripod socket, and is it acceptable to buy the adapter separately?
The shared R7 manual confirms a covered 1/4-20 tripod socket and calls for a compatible 90-degree binocular adapter such as BU-BAHQRADPT. The adapter and tripod are not in the standard kit; adapter-in-box is not a match. The R7-1556 BridgeSet is an IPD stabilizer, not this mounting bracket.
Explore this need in the finder →The Bushnell R7 10x50 (U.S. product ID BU-R7-1050; manual SKU R7-1050) keeps the 10x power of the 10x42 but moves to 50 mm objectives. The larger exit pupil and longer listed eye relief are the concrete differences; they come with a 32.7-ounce instrument and not a wider field. It is a better match for someone willing to carry the extra bulk for a larger aperture than for someone who simply wants the R7’s lightest 10x configuration.
What changes from the 10x42?
Bushnell lists a 340-foot field at 1,000 yards (113 m at 1,000 m), 19 mm eye relief, 5 mm exit pupil, and a 7-foot close-focus distance. The 10x42 lists 345 feet, 18 mm, 4.2 mm, and 5 feet, respectively. The two 10x views therefore have nearly the same published field width, while the 50 mm version’s larger exit pupil and longer published relief may matter to some users. Eye relief is not a promise that a particular set of glasses will show the whole field, and the nominal aperture figures alone do not establish a measured brightness advantage in a specific lighting condition.
The weight difference is straightforward: the 10x50 is 32.7 ounces (927 g), compared with 27.2 ounces for the 10x42. A 5.5-ounce increase is easy to overlook in a table but accumulates on a long walk; the binocular alone is not the full carried kit. Its listed length is 6.7 inches, versus 5.9 inches for the 42 mm model. If your use is mostly walking or birding while moving, start by asking whether the objective-size difference is worth the extra carry weight, rather than assuming a larger lens automatically improves every view.
The shared R7 setup
The exact page identifies a fixed 10x50 with ED Prime objective glass, field-flattener optics, Schmidt-Pechan roof prisms, BaK-4 glass, dielectric and PC-3 phase coatings, fully multi-coated optics, and Ultra Wideband coating. It also lists a locking diopter, twist-detent interchangeable eyecups, magnesium-alloy chassis, EXO Barrier, IPX7 waterproofing, and nitrogen gas purging. These are manufacturer-published features, not independent measurements of resolution, contrast, low-light usability, or weather endurance.
R7-1050 shares the family’s three eyecup types—low profile, medium, and winged. The manual says the low eyecup is for glasses and recommends adjusting the eyecup position to maximize field without dark edges. It also gives a concrete diopter routine: pull the ring to unlock it, focus one eye with the center wheel, adjust the second eye, then press the diopter inward to lock. A locking setting is helpful when the binocular is passed among users, but it does not mean every user shares the same correction.
The R7-1050 product page and manual list a Vault Lite harness/pack, neck strap, lens covers, and cleaning cloth as standard contents. A tripod adapter is not listed in the package. The manual identifies a covered 1/4-20 socket and calls for a compatible 90-degree binocular adapter, such as Bushnell BU-BAHQRADPT, to mount on a standard tripod; it notes that not every adapter fits the rearward port on 42 mm models. A tripod-compatible label is therefore not a tripod-ready kit.
Water, care, and field use
The manual rates R7 models IPX7 but specifically says to avoid deep or prolonged immersion. Use that as a limited water-resistance boundary, not an invitation to submerge the instrument. Nitrogen purging is listed for fog resistance. EXO Barrier is an exterior lens treatment; it does not protect against grit dragged across the glass. Bushnell’s guide says to brush or blow debris away first, use microfiber gently, and never clean the lenses with household window liquids. Its warning is explicit: do not look at the Sun through these optics.
The 10x50 is tripod-compatible, which can help for a stationary observation point or longer sessions, especially as magnification increases. It is still possible to use it handheld, but support may be attractive if you dislike a moving view; that is a use consideration, not a measured claim about stability. If you require a support adapter in the box, this model does not meet that need on the documented package list.
Where it fits in the R7 family
Choose the R7 10x50 when you want 10x and a 50 mm objective, and accept 32.7 ounces before harness or strap. The R7 10x42 keeps nearly the same field while saving 5.5 ounces. The R7 12x50 adds power but narrows the published field to 290 feet and weighs 32.4 ounces; its 18 mm eye relief and 4.2 mm exit pupil are also different. The 8x42 is the broad-field option at 425 feet and 27.2 ounces. For the 15x56, plan on tripod use and a much heavier load. The R7 comparison guide sets those tradeoffs side by side. No choice here guarantees personal eye fit or an image quality result without trying the instrument.
Manufacturer references: exact R7 10x50 product page and shared R7 owner’s guide, English pages 3–6. The exact product-linked image is archived and visually checked; its photo/render method and republication permission are unknown.
Key specifications
Key details at a glance
| Magnification | 10× |
|---|---|
| Objective diameter | 50 mm |
| Real field of view | 6.49° |
| Field width at 1,000 m | 113 m |
| Eye relief | 19 mm |
| Exit pupil | 5 mm |
More specifications and setup details
| Close focus distance | 7 ft |
|---|---|
| Manufacturer-published weight | 32.7 oz |
| ED glass confirmed for this exact model | Yes |
| Phase coatings confirmed | Yes |
| Locking diopter ring confirmed | Yes |
| Lens and prism coatings | Exact page lists ED Prime glass, fully multi-coated optics, Ultra Wideband coating, PC-3 phase treatment and EXO Barrier. The 15x56 page lists Abbe-Koenig prisms and PC-3 phase coating but does not list dielectric coating; no dielectric claim is transferred to it. |
| Water and fog protection | IPX7 per the exact R7 manual; avoid deep or prolonged immersion. Do not interpret as an underwater-use rating. |
| Tripod use | The shared exact R7 manual shows a covered direct 1/4-20 socket and a separate compatible 90-degree adapter (such as BU-BAHQRADPT). That adapter and a tripod are absent from the listed standard kit. For 42 mm models, not all adapters fit the rearward position. |
| Published weight note | Bushnell-listed instrument weight only; pack/harness, strap, caps, tripod adapter and support add carried mass. No independent weighing was performed. |
| Manufacturer-rated waterproof | Yes |
| Built-in image stabilization confirmed | No |
| Integrated laser rangefinder | No |
| Onboard ballistic solution display | No |
| Tripod adapter in package | No |
| Direct 1/4-20 tripod thread confirmed | Yes |
Use the exact model’s instructions for operating limits, supplied equipment and version differences.
Sources for this review
Sources for this assessment
Choose your optical trade-off first.
Choose viewing purpose first, then magnification, objective size, scene width and any fit, weather or mounting constraint. A direct-Sun requirement is separate: only exact manufacturer-confirmed solar binoculars can pass it.
