Fit and setup
Binocular eye relief, glasses and diopter setup
A binocular can have strong specifications and still feel wrong if your eyes do not sit at the correct point. Before judging sharpness, set the barrels for your eye spacing, adjust the eyecups for glasses or bare eyes and learn how the two focus controls work on your exact model.
Start with one circular view
Open or close the two barrels until the separate circles merge into a single round field. The distance between your pupils is individual; the barrel hinge is there to align the eyepieces with your eyes. Looking through a pair that is too wide or too narrow can make the view uncomfortable even when the optics are clear.
The exact M5 and P7 50 mm manuals describe four-position turn-and-slide eyecups. Nikon recommends full retraction for glasses wearers and full extension without glasses, with intermediate clicks available for finer positioning. Do not force the cups or press spectacles against them. Your useful setting may differ with deep-set eyes, large frames or a different lens shape.
Eye relief is useful—but not a fit guarantee
Eye relief is the distance from the eyepiece lens to the point where your eye can see the full field without vignetting. Nikon explains that high-eye-point designs are intended to help glasses wearers. For the 50 mm M5/P7 choices, the 10x versions list 19.3 mm, while the 12x versions list 16.4 mm. That makes 10x a reasonable place to start if eye position is important, but a number cannot account for all eyecup geometry or frame thickness.
When trying binoculars, adjust the eyecups first, then move the eyepieces a little closer or farther until the circular view is complete. Look around the edge of the field for dark crescents. Check that you can see a full circle without pushing against the lenses; repeat with the sunglasses or prescription glasses you plan to use outdoors. A fit that works without glasses can fail with them.
Set the diopter separately from central focus
These four models use central focus and a separate right-eye diopter adjustment. The exact P7 50 mm manual says to focus the left eye with the center wheel, extend the right eyecup and diopter ring to release its lock, pull the ring up to adjust the right eye, then push it down to lock. The M5 manual describes the separate diopter adjustment but no locking action. Follow the guide for your exact model rather than assuming every ring behaves alike.
Once your own right-eye adjustment is sharp, the P7 lock can reduce accidental turns during carrying or hand-offs; it does not stop central focus from changing with distance. The M5 manual offers no such lock claim. Recheck the view with both eyes and note the diopter position for later. If another viewer uses the binocular, reset the setting rather than assuming the previous person's adjustment will fit.
Do not mistake fit for optical sharpness
Try focusing on a distant subject in good light before deciding that one barrel is defective or that the image is inherently soft. Make sure both circles merge, your eyes are placed correctly, the diopter is set and focus is not beyond the direction stop. If you change observers, reset or check the adjustment. A locked ring may hold a previous person’s setting, which is useful only if that is the correct setting for you.
Diopter settings do not cure unequal prescriptions or correct an eyecup that prevents your glasses from reaching the proper eye point. If the full view is not comfortable, compare longer-eye-relief models or another eyecup design. On the 50 mm Nikon family described here, the published eye point is longer on both 10x sizes, but a different 42 mm or compact model may fit you better in person.
Keep lenses clean and instructions model-specific
Use the instructions for your exact configuration. Before cleaning, remove loose dust with a blower, then gently wipe a smudge with a clean lens cloth. The model-specific manuals caution against rubbing grit across glass and advise wiping water off promptly. Never look at the sun through binoculars.
If a pair feels strained after correcting eye position, stop and rest rather than forcing a view. The setup should merge into one comfortable circle with a clear subject, not require pressure against your glasses or repeated twisting beyond the control’s stop.
Further reading: Nikon's eye-relief explanation, its US setup guide and Nikon's exact M5 and P7 50 mm instructions.