Model comparisons
Celestron EclipSmart solar binoculars compared
Celestron’s EclipSmart binoculars are unusual because the solar filter is built permanently into the objective, making the models dedicated Sun-viewing instruments rather than everyday binoculars with an optional accessory. The useful comparison is the size and power you can handle, then the exact filter and mount limits—not the temptation to use them for birds, landscapes or night skies.
Four optical configurations, three current choices
| Item | Design and power | Stated field | Eye relief / weight | Tripod adaptability | Library status |
|---|---|---|---|---|---|
| 71237 | 10x25 roof | 5.7°; 288 ft / 1,000 yd | 10.5 mm / 11.46 oz | No | Current model |
| 71238 | 10x42 Porro | 6°; 315 ft / 1,000 yd | 12.7 mm / 24 oz | No | Current model |
| 71239 | 12x50 Porro | 5°; 261 ft / 1,000 yd | 12 mm / 31.5 oz | Yes; adapter not listed in box | Current model; page showed out of stock when checked |
| 71240 | 20x50 Porro | 3.4°; 180 ft / 1,000 yd | 8 mm / 31.5 oz | Yes; adapter not listed in box | Discontinued reference only |
These are manufacturer-published specifications, not bench measurements. The 10x25 is the lightest and the only roof design. The 10x42 has the widest stated field and lower mass than either 50 mm body. The 12x50 raises power but weighs 31.5 oz and narrows the field. The 20x50 used to offer still higher magnification, but the official US collection marks item 71240 discontinued; it is retained as a historical reference and is not a current recommendation.
Start by deciding whether a solar-only instrument suits you
All four exact product pages describe permanent built-in solar filters. Celestron says users should not be able to see anything but the Sun through a properly functioning EclipSmart; if another scene is visible, stop use and contact Celestron. These filters are not removable, so none of the models can double as normal daytime binoculars or a night-sky pair. If the outing combines terrestrial viewing and eclipse watching, take a separate appropriate binocular for terrestrial subjects.
Choose the 10x25 when low carry weight is the deciding constraint and handheld use is acceptable. Choose the 10x42 when you prefer 10x but want a larger body, broader published field and longer eye relief. The 12x50 suits a stationary observer who accepts heavier carry and wants the page-listed tripod adaptation. The adapter is not in its standard included-items list, and the exact manual does not identify an adapter model; check the interface before buying support hardware. There is no current 20x choice in this family, even though the old 20x50 remains a useful record of what the line once included.
Use the filter safely; do not stretch the product claim
Celestron states that the built-in Solar Safe filter technology meets transmission requirements it associates with ISO 12312-2 and says the technology was tested by SAI Global. The American Astronomical Society clarifies that ISO 12312-2 formally addresses handheld non-magnifying solar viewers, not filters for binoculars. The manufacturer's statement should therefore not be rewritten as an independent certificate for these specific binoculars. NASA says a purpose-made filter must be over the front of binoculars for direct solar observation; ordinary eclipse glasses in front of the eyes do not make an unfiltered optical instrument safe.
Inspect both objectives before every use. Celestron says not to use the binocular if a filter is damaged, altered or detached. Never remove or modify the permanent filters. The manual gives a safe aiming sequence: align the barrels and focus first, place both eyes behind the eyecups before raising the view toward the Sun, and never take the binocular away from your eyes while your gaze remains toward the Sun. If anything other than the Sun is visible, stop and seek Celestron support. It is a direct-viewing product for people able to follow the instructions, not an unsupervised toy.
Permanent filters also matter during totality. AAS notes that built-in non-removable solar filters are not useful for observing the brief total phase. Keep filters installed and follow a suitable viewing method at each phase; this binocular is not an all-stages eclipse instrument.
Fit and matching boundaries
The questionnaire defaults to ordinary viewing and offers a separate direct-Sun mode. Selecting it requires manufacturer confirmation of a purpose-built solar filter for the exact model; an ordinary pair with unknown solar filtering must not pass. The default ordinary-view mode rejects these permanently filtered instruments. Then select exact magnification, objective size, eye relief, weight and support needs. A 12 mm eye-relief floor excludes the 10x25, while a 13 mm floor excludes all current EclipSmart configurations. A tripod requirement excludes both 10x bodies. A requirement for an adapter in the box excludes the 50 mm models as well, because Celestron’s included-items lists do not identify one. Unknown support details are not promoted into a compatibility claim.
Setup remains ordinary binocular work up to the safety-critical pointing step: adjust interpupillary distance until there is one merged image, focus, then refine the right-eye diopter; fold the rubber eyecups down for glasses. For care, use the supplied case, remove loose dust before cleaning and do not try to open the binocular or clean its internal optics. A small amount of magnification does not make a damaged filter acceptable.
Primary references: Celestron’s EclipSmart family collection, the shared manual, NASA eclipse safety, and the AAS guidance on filters for optics.